| Join Us .. Linked In | ||
 |
 |
 |
"TOA"
TOA have produced a lot of Products in the filed of Audio equipment.
SOUND SPEAKERS
| Model no. | Description | ||
| PC-1867FC EN54-24 compliant Ceiling Mount Speaker | |||
 |
TOA's PC-1867FC Ceiling Mount Speaker features an iron-made dome that prevents the fire from spreading in the ceiling in case of an emergency situation. The ceramic clamp with thermal fuse reduces the risk of a fire-induced short-circuit on the loudspeaker line. The speaker can be easily installed using the speaker mounting spring and the dome can also be easily mounted in the speaker mounting hole in the ceiling panel. | ||
| Features |  |
 |
|
| PC-2369 Ceiling flush-mount Speaker | |||
 |
Uncomplicated and easy-to-use fittings cut installation time to half that of conventional models thanks to TOA's new proprietary SUS spring-based installation method. Finely crafted design with thin panel that does not detract from venue architecture or interior decor. |
||
| Features | |
|
|
| BS-1034 and BS-1034S | |||
 |
The BS-1034 and BS-1034S are wall-mount speakers matched with a supplied plug-in speaker bracket, for easy installation. The BS-1034/1034S combine a low-frequency 5" (12cm) cone-type speaker and a high-frequency balanced dome-type speaker. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. The speaker enclosure’s design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible. Enclosure and grille net color is off-white, except on the BS-1034S, which comes with a silver net grille. | ||
| Features | |
|
|
| BS-678B:Box Speaker | |||
 |
The BS-678B, is made of wood and can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678B have a built-in attenuator and can be connected to a 2-wire or 3-wire system. |
||
| Features | |
 |
|
| BS-678T:Box Speaker with Attenuator | |||
 |
The BS-678T, is made of wood and be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch (16 cm) double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678T have a built-in attenuator and can be connected to a 2-wire or 3-wire system. |
||
| Features | |
|
|
| PE-64 Pendant Speaker | |||
 |
The PE-64/304 are HIPS resin bass-reflex enclosure 5" (12cm) cone type pendant speakers intended for ceiling suspension installation. The PE-304 also includes a balanced dome tweeter. They have an outstandingly stylish design that is inspired by the finest lighting fixtures, allowing them to harmoniously blend in with lighting equipment. They are ideally suited for such applications as BGM and announcements at high-ceiling venues such as airports, factories and shopping malls. The speakers are easy to repaint, extending the range of design needs they can meet. A directly attached sturdy suspension cable is extendable up to 5 meters. PE-64 is driven on a high-impedance (100V or 70V) line, and PE-304 is driven on a high and low-impedance(8Ω) line. Input impedance is adjustable with rotary switch on the upper side of the speaker. |
||
| Features | |
|
|
| PJ-64: PJ-64 and PJ-304 Projection Speaker | |||
 |
The PJ-64/304 are bass-reflex HIPS resin enclosure 5" (12cm) conetype projection speakers intended for ceiling and wall installation. The PJ-304 also includes a balanced dome tweeter. They have an outstandingly stylish design that is inspired by the finest lighting fixtures, allowing them to be harmoniously installed with lighting equipment. They are ideally suited for such applications as BGM and announcements at airports, subway stations, art museums and shopping malls. The speakers are easy to repaint, extending the range of design needs they can meet. A supplied swivel bracket accessory allows for flexible speaker angle adjustment. PJ-64 is driven on a high impedance (100V or 70V) line, and PJ-304 is driven on a high- and low impedance (8Ω) line. Input impedance is adjustable with rotary switch on the upper side of the speaker. |
||
| Features | |
|
|
